Automotive Brake Repair in Buford and Cumming, GA

Here are some signs that will tell you when your brakes need to be serviced or repaired:

• Grinding when you come to a stop

• Vehicle pulls to one side when braking

• Car wobbles or vibrates when driving on the highway

• Pulsating brake pedal or steering wheel shake while braking down hills

• Brake pedal feels mushy or softer than usual

• Any noise like a squeal, scrape, grind, or clicking sound when you step on the brake pedal

• Repeatedly adding brake fluid to the master cylinder

• Any brake fluid leaking from your car

• Unusual odor or noise

• ABS and/or brake light is illuminated while driving or braking

Your brake system is the most important safety item your vehicle can offer. So please stop in or call us right away if you experience any of the symptoms listed above. We’ll schedule you right away to have one of our expert, ASE certified, brake repair mechanics fully inspect your entire brake system and use NAPA parts. Remember, your family’s safety is our biggest concern, take one of our free loaner cars to drive while we inspect and service your brakes. Stay local – Trust the professionals at Team Ryan Automotive for all your brake repair and maintenance in Buford and Cumming, GA.

We offer comprehensive brake repairs and services. While your vehicle is with us, we will check the following: 

• Brake pads

• Calibers

• Brake/hydraulic fluid

• Brake hoses

• Rotors

• Brake hardware

Let our ASE certified technicians assist you with your brake service needs. Did you know that we include a free brake inspection with every oil change?

One thing you can do as a vehicle owner is better understand the different moving parts that make up your brake system. When you press your brake pedal the brake pads create friction; in turn, the brake rotor disperses heat throughout the vehicle to keep the brakes themselves from overheating. Both are essential to the proper functioning of your braking system.

There are 3 categories of components to consider when we inspect your brake system for normal wear or problems; hydraulics, friction material, and computer controlled electronics for your Anti Lock Brakes (ABS).

The Master Cylinder  acts as the reservoir for the excess brake fluid and creates the hydraulic force needed to stop your car when you step on the brake pedal. Connected by a series of high pressure steel brake lines and rubber brake hoses, your master cylinder is the device that does most of the hard work. Supplying the force behind the hydraulic brake fluid when you step on the brake pedal to come to a stop. Think of your cars master cylinder like a pressure converter. When you press down on the brake pedal (physical pressure from your foot), the master cylinder converts this to hydraulic pressure, and brake fluid is responsible for transferring this force to each of your wheel’s brakes.

The master cylinder, the heart of the vehicle’s braking system, holds the brake fluid when it is not being delivered to the brakes through the brake lines. If brake fluid leaks because the master cylinder is worn or brake lines are plugged or broken, the fluid cannot be delivered, and the brake pads will become ruined.

Brake Lines are typically made from steel, run from the master cylinder along the frame, and carry the high hydraulic brake fluid pressure to each wheel. If the brake lines are allowed to rust too much, they can rupture unexpectedly during a panic stop. This emergency situation can result in your brake pedal falling to the floor and not being able to stop in time.

The brake fluid itself can become dirty or contaminated as it draws rust-causing moisture and picks up other debris, or it can break down from excess heat. Clean brake fluid is either clear or slightly yellow, while dirty brake fluid may be brown or even black. Old and dirty brake fluid can damage ABS brake systems internally.

Rubber brake hoses connect the steel brake lines to each wheel, providing the flexibility needed when your car is going over bumps or rough terrain. They directly deliver pressurized brake fluid to the brake calipers or wheel cylinders.

Disc brake calipers squeeze your brake pads onto the brake rotor to help you stop your car. Brake calipers come in many sizes, but they all have pistons and seals that convert hydraulic brake pressure into a squeezing motion that requires a friction material called brake pads. All modern automotive brake systems use brake calipers on the front wheels and most cars also use them on the rear as well.

Brake pads and shoes can be made of ceramic, metal or organic materials, while the disc rotors and drums they press against are made of metal. Because the pads and shoes create friction to stop the car, they gradually wear down over time and may wear away completely, letting the metal of the calipers and cylinders they are attached to grind against the rotors and drums and damage them. Some pads have a metal strip attached that sounds a warning whistle when the pad becomes too worn, but this strip sounds only when the car is in motion and the brakes are not applied.

Brake Rotors and every disc brake system uses disc brake rotors made out of steel to provide the needed drag when the brake pads are being squeezed by the calipers. Since they undergo intense heat and pressure, they can warp which causes the all too familiar pulsation feel when stepping on the brakes. Brake rotors are a wear item and need to be cut or machined and often replaced with every brake job as they slowly wear down below their minimum allowed thickness.

Disc Brake Pads:  A disc brake pad has a steel backing plate with a wearable friction material either riveted or bonded to it. The friction material rubs against the brake rotor when the caliper squeezes them together. It’s this friction material that is always being reformulated to achieve the best braking efficiency while keeping the noise and dust levels tolerable. Although asbestos isn’t used as a friction material anymore, the three main types in use today are organic, semi-metallic, and ceramic brake pads.

Because ceramic brakes have several major advantages over the others, this is our preferred brake pad material at Team Ryan Automotive. They typically last twice as long, our customers have fewer brake noise complaints, and produce a very light tan colored dust that doesn’t stick to your wheels like that annoying black dust from metallic brake pads.

Drum Brake Shoes – A drum brake system uses steel backed shoes with the wearable friction material either bonded or riveted to them to provide the stopping power your car vehicle needs. This system uses a series of return springs and other hardware that needs to be replaced with each brake shoe service.

ABS Brake Systems – Just about every car on the road today has some form of computer control tied into their braking system. Whether it’s for improved braking performance in wet, snowy, or icy conditions to traction control systems to help you go when you need to; your ABS module and controller is always there to help you stay in control. You may feel a little pulsing or buzzing under your foot when applying the brakes as your wheel speed sensors detect some slippage under adverse weather conditions. This is normal, just keep your foot on the brakes and let your car do the braking. Your anti-lock brake system is capable of pumping the brakes many times faster than we can through the network of sensors and solenoids that make up your ABS brake system.

However, if your ABS light stays illuminated on the dash while driving, your ABS computer may be trying to tell you about a problem and should be checked by a certified mechanic specializing in brake repair.